Fiber Optic Loopback Cable MTRJ Singlemode Multimode

Fiber optic loopback plugs are designed for equipment testing, self-testing, engineering, network diagnostics and measurement applications.These devices are typically used for testing the transmission capability and receiver sensitivity of network equipment,and play an important role in fiber optic link troubleshooting.

Fiber optic loopback modules LC are designed to provide test engineers with an effective way of testing the transmission capability and receiver sensitivity of optical network equipment.

Fiber loopback is designed to provide a media of return patch for a fiber optic signal; typically it is used for fiber testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem.

The LC fiber loopback is used to test the signal backhaul in the system or network system. Through the backhaul signal, various potential anomalies in the network link can be detected. This type of detection is commonly used to ensure the network link..

A loopback cable is also known as loopback plug or loopback adapter, which is a plug used to test physical ports to identify network problem. It provides system test engineers a simple but effective way of testing the transmission capability and receiver sensitivity of network equipment.

FC/APC Fast Connector,also known as Field installation connector FC/APC,or Fast assembly connector FC/APC, is a new kind of connector that can be used in FTTH project scene. They don’t need polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Furthermore, it doesn’t need the fused fiber. Only need some simple tools,by this way,it can save time and cost.SZOPT can offer you different models for options,please reach us for details.

Adapter type fixed attenuator is the female to female fixed fiber optic attenuator,whichutilizes the air gap between two connectors to achieve the optical attenuation. Fixed adapter type attenuator is simple, low-cost and compact. It is recommended for use where return loss is not a concern nor is absolute attenuation value.

SZOPT offers a full range of CWDM&DWDM to meet the demand of applications such as: Gigabit & 10G Ethernet,SDH/SONET,ATM,ESCON,Fibre Channel,FTTx and CATV,etc.

Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.

Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.

Ethernet patch cables are widely used for lan network,available cat5,cat6,cat7,cat8,etc,with UTP,FTP,SFTP,etc.shielding mode.Please check with us for details.

Fiber Optic PLC splitter patch panel is a kind of distribution box fabricated by using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical signal power management. SZOPT provides a whole series of 1 x N and 2 x N splitters that are tailored for specific applications. All our products meet Telcordia 1209 and 1221 reliability requirements and are certified by TLC for network development requirment..