UTP Cat5 Cat6 Cat7 Lan Cable

Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.

With the development of optical fiber communication technology, especially the 3G, 4G, and 5G and WiMax base stations technology, ODVA FTTA cable assemblies are becoming more and more popular.SZOPT offers lots of types of FTTA patch cords,SZOPT keeps strict quality control from incoming raw materials,production process to final test,make sure each item from our factory are satisfied by our customers,please reach us for detail.

The 250μm fibers are positioned in a high modulus plastic loose tube.The tubes are filled with a water-resistant filling compound,wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The outer sheath can be PE or custom.

LC/UPC Fast Connector,also known as Field installation connector LC/UPC,or Fast assembly connector LC/UPC, is a new kind of connector that can be used in FTTH project scene. They don’t need polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Furthermore, it doesn’t need the fused fiber. Only need some simple tools,by this way,it can save time and cost.SZOPT can offer you different models for options,please reach us for details.

This is a kind of stainless steel tube mini module PLC Splitter 1:4 sc/apc in 0.9mm cable,the cable length is usually 1-1.5m.Available wavelength is:1260-1650nm.

Armored fiber optic cable consists of a cable surrounded by a stainless steel tube to protect it from moisture and abrasion. Such armored cable can be much stronger than regular indoor cable due to its high tensile force.SZOPT offers both singlemode and multimode armored cable with outer sheath of yellow,blue,beige or custom.

Mobile network operation is increasing nowadays,SZOPT’s network infrastructures cable assemblies are keeping up with the continuous high-bandwidth growth,and excel subscribers’ expectations.What’s more,to add the capacity and coverage, we are involved in deploying distributed antenna system (DAS) networks and small cells.

ADSS is the short form of All-dielectric Self-supporting,ADSS cable is a type of fiber optic cable that is strong enough to support itself between structures without containing conductive metal elements. The fibers can be arranged in ADSS cables with a maximum of 144 fibers. ADSS fiber optic cable is designed for outside plant aerial and duct applications in local and campus network loop architectures from pole-to-building to town-to-town installations. The cabling system that includes cables, suspension, dead-end, and termination enclosures offers a comprehensive transmission circuit infrastructure with high-reliability performance.

A loopback cable is also known as loopback plug or loopback adapter, which is a plug used to test physical ports to identify network problem. It provides system test engineers a simple but effective way of testing the transmission capability and receiver sensitivity of network equipment.

This QSFP+ QSFP28 transceiver module is a high performance module for short-range duplex data communication and interconnect applications.

Simplex fiber optic cable consists of a single fiber,tight-buffered (coated with a 900 micron buffer over the primary buffer coating) with Kevlar (aramid yarn) strength members and jacketed for indoor use.The outer jacket can be with Riser, Plenum rated constructions and LSZH jacket.Duplex cable has two types,one is with two individual fibers in “8”digit,the other has two fibers in a round cable.

Fiber optic loopback plugs are designed for equipment testing, self-testing, engineering, network diagnostics and measurement applications.These devices are typically used for testing the transmission capability and receiver sensitivity of network equipment,and play an important role in fiber optic link troubleshooting.