The ribbon Optical Pigtail SC/FC/LC/ST/MU/E2000 12C 24C 48C 96C 144C usually has 12 or 24 connectors on one end,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom,the cable diameter can be custom,etc.
Fiber Optical Pigtail SC/FC/LC/ST/MU/E2000 12C 24C 48C 96C 144C has connectors on one end,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom,the cable diameter can be custom,etc.
Such patch cords are armored with black PE jacket,waterproof,roden-proof,widely used for harsh environment,there's a stainless steel strength member inside to make the cable tough tensile strenth,the fiber counts can be up to 24 fibers.
Fiber Optical Patch Cord SMA-SMA has SMA connectors on both ends,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom.Simplex or Duplex is available.
Mode conditioning patch cords are required when Gigabit 1000BASE-LX
routers and switches are installed into existing multimode cable plants. They
are used to adapt the singlemode output of Gigabit Ethernet (1000BASE-LX)
transceivers to a multimode cable network. All SZOPT’s mode-conditioning patch
cords are fully compliant with IEEE 802.3z application standards.
Hybrid cable assemblies typically include two
or more power cables along with fiber optic or copper cables covered by one
overall jacket.Such structure provides robust interconnecting power and fiber
optic links between main and remote units for outdoor and indoor radio base
stations.
Polarization maintaining (PM) patch cord / jumper leads are built
with polarization maintaining panda fiber and connectorise using FC/UPC,
FC/APC, SC and LC connectors,etc. Such PM Patchcords can be supplied in 250um bare fiber,
900um buffered fiber or 3mm OD cable.
Fiber loopback is designed to provide a media of return patch for a
fiber optic signal; typically it is used for
fiber testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem.
The LC fiber loopback is used to test the signal backhaul in the system
or network system. Through the backhaul signal, various potential anomalies in
the network link can be detected. This type of detection is commonly used to
ensure the network link..