5G Optical Fiber and Power Hybrid Cable

OPGW is designed to replace traditional static,shield,ground cables in overhead transmission lines，it’s of additional telecommunications purposes because of containing optical fibers inside.

OPPC is a type of power composite cable that combines optical fiber unit and traditional phase structure in the wire, it makes full use of its own line power system resources, particularly the power system resources, particularly the power distribution network system, to avoid conflict with the outside world in aspects such as frequency resources, routing coordination, electromagnetic compatibility, which gives it dual functions of power transmission and communication.

It's a type of photoelectric composite cable for low voltage power line,and communication optical cable.With PON(passive optical network) technology,it realizes FTTH residential users’ electricity information collection business carrying information intranet,and information outer network “ Network convergance” businessmeets the demands of smart grid informatization,automation and interaction.

Indoor Hybrid Cable is for indoor installations that utilize a centralized power supply to remote power and devices, thus eliminates the need to provide local AC power to each location.The two copper wires provide power from a centralized power supply to end devices while fiber optic elements provide bi-directional data paths through the cable.

Outdoor Hybrid Cable is for outdoor installations that utilize a centralized power supply to remote power and devices, thus eliminates the need to provide local AC power to each location.The two copper wires provide power from a centralized power supply to end devices while fiber optic elements provide bi-directional data paths through the cable.

Variable in-line optical attenuators,also know as adjustable in-line optical attenuator or short as VOA, are used to permit dynamic control of optical power levels in a fiber. It can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter. Furthermore, they can the used in optical amplifier systems to balance the gain across the different operating wavelengths.

ODF is the short term of Optical Distribution Frame, is a high-density, large-capacity design box with cold rolled steel sheet, reasonable distribution, easy to manage, install and operate.

Fiber Optical Patch Cord MU E2000 has MU/UPC E2000/UPC connectors on both ends,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom.

It's a type of photoelectric composite cable for low voltage power line,and communication optical cable.With PON(passive optical network) technology,it realizes FTTH residential users’ electricity information collection business carrying information intranet,and information outer network “ Network convergance” businessmeets the demands of smart grid informatization,automation and interaction.

RJ45 ethernet extension cables are widely used for lan network,such as home,office,cafe,hotel,etc.where the patch cable is not long enough,UTP,FTP,SFTP,etc.are available.

MPO/MTP Fiber Optic Cassette Box is usually the connection of trunk cable and the next MPO/MTP cassette in distribution area of MDA, IDA or HDA data centers. It could be installed 1pc or 2pcs of 0.9mm MPO/MTP-LC harness patch cord 12C inside.

GYTS/GYTA cable is a type of the outdoor cable used for duct and direct buried applications with corrugated steel tape or aluminum tape. SZOPT supplies both single mode and multimode GYTS cables.PBT loose tube has 2-12 fibers, The central Strength member is: steel wire. It has a Filling Compound; Longitudinal corrugated steel tape laminated with polyethylene on both sides. Consequently.