• 2021-12-14

In the 110kV~220kV high-voltage power grid, the reason for the burnt and broken cables of the optical fiber communication cable is caused by electric corrosion. The main causes of electric corrosion are as follows: (1)             Breakdown: The space potential of the ADSS optical cable is too high, so that an electric arc with sufficient...

• 2022-02-25

FTTA is a wireless site architecture where optical fiber is run all the way up the tower to replace much of what is traditionally completed with heavier coax cabling. Important components such as remote radio units (RRUs) are also positioned at the top of the tower instead of at the base location. In a FTTA configuration case, a baseband unit (BBU) situates near the bottom of the tower that c...

• 2022-03-02

Fiber Adapter,known as fiber coupler, It is applied to the link of optical equipment terminals, such as ODF equipment and FTTH terminal. SZOPT provide various types of adapters. These adapters can easily match the same type of Fiber connectors (LC-LC, SC-SC, FC-FC, etc.) or different types of Fiber connectors (sc-fc, lc-sc, sc-st, etc.) to provide effective links. Our Fiber adapter features h...

• 2022-03-31

Planar Lightwave Circuit (PLC) Mini Module Splitters are one of SZOPT's competitive items,they can go with or without connectors.  Fabricated using silica optical waveguide technology to distribute optical signals accurately and evenly with minimal loss providing a low cost light distribution solution with small form factor and high reliability. Constructed with the highest quality Corning&re...

• 2022-04-18

A hybrid cable incorporates optical fibers and copper wires within the same jacket, and can supply power to devices while transmitting data. The 5G hybrid fiber optic and power cables incorporate both fiber and copper conductors in one cable. It contains two or more copper conductors that deliver DC power and optical fiber strands that deliver data to a remote device through one medium. A single c...