• 2021-09-16

CIOE 2021 (The 23rd China International Optoelectronic Exposition), as the world’s leading optoelectronic exhibition, is holding at Shenzhen World Exhibition & Convention Center on September 16-18, 2021. The booth# of SZOPT Communication Co.,ltd is:6T32,in Hall 6.We showed some of our main products such as Ftth drop cables,optical cables indoor/outdoor,MPO/MTP trunk cables,harness patch cables...

• 2021-10-22

Quite a few customers frequently ask us the difference of OFNR&OFNP when they inquire optical cables,SZOPT has lots of types of indoor cables,OFNR&OFNP is common cable jacket,let’s explain for you:   OFNR is the short term of optical fiber nonconductive riser, and OFNR cables are used in Riser areas which are building vertical shafts or runs from one floor to another floor;   OFN...

• 2021-11-06

SZOPT Communication Co.,Ltd.is a leading professional manufacturer of Ftth Drop Cables,Optical Fiber Cables,Lan Calbes,MPO MTP trunk cables,Fiber Patch Cords,PLC Splitters,Fast Connectors,Fiber Adapters,Optical Attenuators,Fiber Patch Panels,etc.in Shenzhen,China.More details please browse www.chinaoptfiber.com Due to overseas marketing needs,we are looking for overseas marketing managers,if you a...

• 2021-11-18

FTTH fast connectors, also be called quick field installable connector, are kind of connector that widely used in FTTH project scene. Without epoxy,without fusing,no need polishing, these fast connectors can be installed in the field and make the connection less than two minutes.by this way, it can save much time and cost. The fast connectors are the good solution for LAN& CCTV applications an...

• 2021-11-26

1. Outer Sheath: Indoor optical cables generally use polyvinyl chloride or flame-retardant polyvinyl chloride, and the surface should be smooth, bright, flexible and easy to detach. The smoothness of the outer sheath of the optical cable is not very good, and it is easy to adhere to the tight buffer and aramid yarn inside. The PE sheath of the outdoor cable should be made of high-quality black pol...

• 2021-12-08

FTTH drop cable is widely used in the access network due to its softness and lightness; because its shape is butterfly-shaped; it is also called butterfly cable, 8 digit optical cable, and FTTH drop cable is usually 1core,2core or 4core.The strength member is located at the center of the two circles as metal or non-metal material,and the optical fiber is located at the geometric center of the8 dig...

• 2021-12-14

In the 110kV~220kV high-voltage power grid, the reason for the burnt and broken cables of the optical fiber communication cable is caused by electric corrosion. The main causes of electric corrosion are as follows: (1)             Breakdown: The space potential of the ADSS optical cable is too high, so that an electric arc with sufficient...

• 2021-12-20

There are several features for the pulling eye pre-terminated fiber optical patch cables that make them preferable for indoor/outdoor installations. The first feature is that these cables are pre-terminated, which means the procedures of stripping the cables, preparing the epoxy, applying the connector, scribe and polishing, inspecting and testing are all done on the manufacturer’s side. One of th...

• 2022-01-21

OM5 optic cables utilize the latest technology in the networking industry. These cables were specifically designed to handle high-speed data center applications and can transfer up to 100gb of data with ease. SZOPT has the latest standard in OM5 optic cables, widely applicable for FTTH cabling system. With the technology introduced to OM5 cables, the wavelengths increase each fiber's capacity by a...

• 2022-02-10

AOC,is the short form of active optical cable,which has modules at either end of an optical fiber cable that allows direct communication between devices over that permanently attached fiber cable. Both ends have specific connectors and the cable length is fixed.   This AOC cable, unlike traditional optical transceivers, is permanently attached to the transceivers at either end. This both prev...

• 2022-03-02

Fiber Adapter,known as fiber coupler, It is applied to the link of optical equipment terminals, such as ODF equipment and FTTH terminal. SZOPT provide various types of adapters. These adapters can easily match the same type of Fiber connectors (LC-LC, SC-SC, FC-FC, etc.) or different types of Fiber connectors (sc-fc, lc-sc, sc-st, etc.) to provide effective links. Our Fiber adapter features h...

• 2022-03-10

MPO is the industry acronym for “multi-fiber push on.” These connectors have more than 1 fiber in a single ferrule and snap into place by a mechanical mechanism. There are many designs of MPO on the market for the various manufacturers. As with any type of connectivity product, the performance and cost of these vary considerably and some have distinct features that enable better “overlife” perform...