Optical Fiber Composition Low Voltage Electric OPLC Cable

OPGW is designed to replace traditional static,shield,ground cables in overhead transmission lines，it’s of additional telecommunications purposes because of containing optical fibers inside.

OPPC is a type of power composite cable that combines optical fiber unit and traditional phase structure in the wire, it makes full use of its own line power system resources, particularly the power system resources, particularly the power distribution network system, to avoid conflict with the outside world in aspects such as frequency resources, routing coordination, electromagnetic compatibility, which gives it dual functions of power transmission and communication.

5G Hybrid Cable is for the purpose of 5G base station,with good mechanical&optical performance,stable&durable.The all-dry hybrid cable structure offers the transmission and power supply for RRU equipments.

Indoor Hybrid Cable is for indoor installations that utilize a centralized power supply to remote power and devices, thus eliminates the need to provide local AC power to each location.The two copper wires provide power from a centralized power supply to end devices while fiber optic elements provide bi-directional data paths through the cable.

Outdoor Hybrid Cable is for outdoor installations that utilize a centralized power supply to remote power and devices, thus eliminates the need to provide local AC power to each location.The two copper wires provide power from a centralized power supply to end devices while fiber optic elements provide bi-directional data paths through the cable.

The pulling eye can further speed up the installation process compared with filed termination. It saves time during installation of conduits, ducts or risers. In addition, the pulling eye protects the connectors of the trunk cables and prevents the cables from twisting during the installation process. Since the pulling eye is strain relived directly onto the outer jacket.With the pulling eye,the tension strength of the cables can reach up to 245N.

Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical receiver distortion due to input optical power powerful. The fixed fiber optic attenuator can achieve the dual function of adapter and attenuators.

Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC and LC connectors,etc. Such PM Patchcords can be supplied in 250um bare fiber, 900um buffered fiber or 3mm OD cable.

With the development of optical fiber communication technology, especially the 3G, 4G, and 5G and WiMax base stations technology, ODVA FTTA cable assemblies are becoming more and more popular.SZOPT offers lots of types of FTTA patch cords,SZOPT keeps strict quality control from incoming raw materials,production process to final test,make sure each item from our factory are satisfied by our customers,please reach us for detail.

This is a kind of ABS box PLC Splitter available with 1X4/1X8/1X16/1X32/1X64/1X128,2X4/2X8/2X16/2X32/2X64/2X128,the terminators can be  sc/lc/fc/st in 3.0mm or 2.0mm cable,the cable length is usually 1-1.5m.Available wavelength is:1260-1650nm.

Mobile network operation is increasing nowadays,SZOPT’s network infrastructures cable assemblies are keeping up with the continuous high-bandwidth growth,and excel subscribers’ expectations.What’s more,to add the capacity and coverage, we are involved in deploying distributed antenna system (DAS) networks and small cells.

This is a kind of ABS box PLC Splitter available with 1X4/1X8/1X16/1X32/1X64/1X128,2X4/2X8/2X16/2X32/2X64/2X128,the terminators can be  sc/lc/fc/st in 3.0mm or 2.0mm cable,the cable length is usually 1-1.5m.Available wavelength is:1260-1650nm.